Electric Hydraulic Demoulder DT-30, it is suitable for demoulding of various types of round test specimens of mixed materials, especially meeting the demoulding requirements of cement mixture strength specimens.
Its load can reach 100KN. The demoulding device is mainly composed of a box, a column, a support plate, a top plate, a demoulding positioning plate, etc.
Use and operation:
Preparation before operation
Connect the 380V power supply, pull the motor switch, and make the demoulding screw move up and down. The middle is the stop position, and the left and right are the ascending and descending positions respectively. Note that the upper position of the screw movement is the horizontal position between the top of the screw and the plane on the top plate, and the lower position of the screw movement is the position 20m above the horizontal plane from the top of the screw.
Electric Hydraulic Demoulder DT-30
Electric Hydraulic Demoulder DT-30
Product use: asphalt, concrete
Electric Hydraulic Demoulder DT-30, it is suitable for demoulding of various types of round test specimens of mixed materials, especially meeting the demoulding requirements of cement mixture strength specimens.
Its load can reach 100KN. The demoulding device is mainly composed of a box, a column, a support plate, a top plate, a demoulding positioning plate, etc.
Use and operation:
Recent Posts
Categories
Contact Us
Tel:+86-18713779288
Email:wheelweight9@ssqcpj.com
Add:Rm. 1901 Cangzhou,Hebei China